Application requirement
Configuration review
The S Series route is reviewed against conductive tooling, load range, temperature measurement, vacuum or inert gas protection, data logging, and the transition from small samples to pilot tooling.
Engineering challenge
Preserve a comparable tooling and measurement setup while moving from small samples toward a pilot-scale SPS process window.
Acceptance method
Use an agreed trial matrix and record temperature, load, displacement, current, voltage, vacuum, gas state, sample geometry, and the selected material test.
Project verification checklist
Confirm powder condition, die diameter, and target density or thermal property.
Verify the temperature measurement method across the planned range.
Record current, pressure, displacement, vacuum, and acceptance criteria for each trial.