Horizontal Type 4415 Industrial Vacuum Sintering Furnace

The Vacuum sintering equipment is mainly used for vacuum sintering and vacuum heat treatment. Suitable for sintering of stainless steel base,cemented carbide,high temperature alloy,high specific gravity alloy,ceramic material,magnetic material,carbide,boride,nitride,oxide and intermetallic compounds.The production processes of fine dewaxing,pre-sintering,sintering and quick cooling can be realized in one furnace.Elminate product quality problems caused by repeated product movement,heating and cooling.It has the advantages of reduce labor intensity,shorten production cycle,improve production efficiency.

Technical Data

1 Uniform heating, Reliable heat insulation and Temperature measurement

Using graphite resistance heating, reasonable heating structure and excellent material to ensure the uniformity of furnace temperature under vacuum.

2 Performs Degassing, Dewaxing and Sintering in Sequence

Using internal tight box to discharge binder vapors and prevent them from adhering to or contaminating furnace walls or the heat-insulating layer.

3 Thorough steam grease cleaning system

Equipped with a unique steam fat removal system to eliminate the troubles of fat removal.

4 Advanced automatic control and reliable safety interlock

Adopt computer to realize automatic control of temperature and action process, and PLC safety interlock. It has sound and light alarm and interlock function such as over-pressure and over-temperature and high water temperature.

5 Efficient fast cooling system

Can be equipped with internal or external circulation rapid cooling device, high-efficiency heat exchange technology blows to the workpiece in multiple directions, cooling quickly and evenly.


4415 Industrial Vacuum Sintering Furnace
ModelVHSgr-40/40/150-1800 (4415)
Equipment FormHorizontal
Loading methodHorizontal side loading
Heating ElementGraphite
Ultimate Vacuum8.0×10-3Pa(8.0×10-5 torr)
Pressure Rising Rate≤2.0Pa/h
Technical parameters of vacuum sintering (use of vacuum sintering)
Heat Area Size400x400x1500mm(WxHxL)
Working Temperature1700℃
Temperature Accuracy±1℃
Technical parameters of vacuum degreasing (for vacuum degreasing)
Applicable material and degreasing processCIM / MIM
Degreasing Temperature100℃ ~ 950℃
Control SystemPLC+HMI
Cooling Water RequirementWater pressure: 0.2~0.3MPa, water flow: 25M3/ h


Cemented Carbide(WC, TiC)

Performs dewaxing, degassing, and sintering in sequence

Oxide Ceramics 

Performs dewaxing, degassing, and sintering processes in sequence

Application: Aluminium Oxide(Al2O3), Zirconium Oxide(ZrO2) 

Non-Oxide Ceramics 

Performs dewaxing, degassing, and sintering processes in sequence

Application: Silicon Carbide(SiC), Silicon Nitride(Si3N4), Aluminum Nitride (AlN) 

Metals and Alloys

Performs dewaxing, degassing, and sintering in sequence


Performs degassing and purification in sequence

Hot Products